STEP 1
Locate the Rewind Knob, on the left side of the camera, and pull it up until the back of the camera opens.
STEP 2
CHOOSE A 35MM FILM. Place the film on the left side of the camera. Push the Rewind Knob down to create a snug fit on the film after it is placed into the pocket.
STEP 3
Pull the leader of the film over to the Take-Up Spool. Insert the narrow end of the film leader into the slot. Hold the spool steady with one hand and push the film deep inside until the film is way inside the spool or comes out the other side.
STEP 4
Make sure the teeth are properly placed on both sides of the film. Use the rewind knob to take in any slack in the film, tighten the film to the camera. Then close the back of the camera and use the film advance to wind the film.
STEP 5
Take 3 pictures. If the film has been loaded properly the rewind knob will turn every time you crank the film advance lever. If not, make sure the slack has been taken out of the film by retightening the film to the camera. Make sure you take at least 2 pictures to clear out the exposed film and start with fresh film. Once you see the number 1 in the window, you are ready to take pictures.
CONGRATULATIONS YOU READY TO TAKE YOUR FIRST IMAGE!!!